The VectorStar ME7838x4 Broadband systems provide high performance 4-port measurements utilizing compact mmwave modules with industry-best calibration stability. While other broadband systems continue to provide raw performance with negative directivity in critical frequency bands, the ME7838 series, which includes the 4-port systems includes broadband systems with positive raw directivity. The result is better calibration stability and better measurement stability with significantly longer time between calibrations for accurate measurements and improved productivity. The new ME7838G4 takes high performance 4-port broadband measurements to a new level by incorporating the Anritsu MA25400A mmWave module. The MA25400A module combines Anritsu developed Nonlinear Transmission Line (NLTL) technology in a small, compact high performance mmWave module with a 0.6 mm test port connector for measurements up to 220 GHz.

Spectrum Analyzer Option

The spectrum analyzer option is the world’s first single sweep spectrum analyzer that covers frequency ranges from 70KHz to 220GHz using mm-wave modules. The Spectrum analyzer option is available on all baseband VectorStar models.

The Spectrum Analyzer option (Option 49) allows for convenient spectral domain measurements of quantities such as harmonics, spurs, distortion products, and general frequency content of a variety of devices. Common measurements include harmonics, tone-based distortion measurements, some spurious measurements, and spectral occupancy tests on devices that may include multiple outputs or input-output comparisons.

The noise figure option is based on a cold source technique for improved noise figure measurement accuracy. VectorStar is the only VNA platform capable of measuring noise figure from 70 kHz to 125 GHz and available with an optimized noise receiver for measurements from 30 GHz to 125 GHz. Additionally, VectorStar is the only VNA that offers a Differential Noise Figure option for characterizing the noise figure of differential devices.

For broadband applications, the ME7838 Series offers superior performance and coverage spanning a range from 70 kHz to 110 GHz, 125 GHz and 145 GHz in a single coaxial test port. The Anritsu developed Non-linear Transmission Line mmWave module is compact while providing high performance up to 145 GHz.

The Anritsu MS4640B Vector Network Analyzer offers a new level of performance for device modeling engineers struggling to accurately and reliably characterize their devices, for R&D engineers pushing the last fraction of a dB out of their state-of-the-art designs, and for the manufacturing engineer trying to maximize throughput without sacrificing accuracy. Backed by a 3-year warranty and the most responsive sales support team, the MS4640B is the VNA of choice for the discerning engineer.

The VectorStar ME7838x4 broadband system VNA offers the widest available 4-port single sweep measurements from 70 kHz to 110, 125, 145, and 150 GHz with mmWave bands up to 1.1 THz

• The ME7838E4X 4-port system sweeps from 70 kHz to 110 GHz (Guaranteed specifications)
• The ME7838A4X 4-port system sweeps from 70 kHz to 125 GHz (Guaranteed specifications)
• The ME7838D4 4-port system sweeps from 70 kHz to 145/150 GHz
• The ME7838G4 4-port system sweeps from 70 kHz to 220 GHz
• All systems may be configured to include banded millimeter-wave modules up to 1.1 THz
• Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs
• All systems also supports the 3744x-Rx receiver for noise figure measurements to 125 GHz
• Compact, lightweight mmWave modules offer low cost installation with industry-best performance

Spectrum Analyzer Option

• SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz.
• Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing.
• SPA available on all ports. User can define which port to use as SPA port.
• Several detection types available in classical mode: Peak, minimum, RMS, Mean.
• Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations.
• Sources and receivers can be independently configured. Can be used as Tracking Generator.
• For units that have a dual source, a dual drive option is available. Support for external source control also possible.
• Phase synchronization for units with Dual source available. This feature allows users to control and configure the phase between the two sources.
• Source and receiver attenuator available with VNA can be activated in SPA mode. Recommendation to use option 62 (with attenuator on receiver side) for measuring the spectrum content of high-power devices.
• Software option: easy to install and upgrade existing user equipment.

Other Features

• Broadest frequency span from a single coaxial test port covering 70 kHz to 70 GHz in a single instrument and 70 kHz to 145 GHz in the Broadband configuration. Extendable to 1.1 THz
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction.
• IMDView™ software coupled with the internal combiner option offers the ability to switch from S parameters to IMD measurements in a single connection
• Highest performance pulse measurements— PulseView™ offers 2.5 ns pulse resolution with 100 dB dynamic range
• 4-port single-ended or balanced measurements using DifferentialView™ analysis
• Internal trace-based eye diagram option provides the ability to display Time Domain, S-Parameters, and Eye Diagram analysis with active sweep updates
• Superior Dynamic Range – up to 142 dB
• High available power – up to +14 dBm
• Best test port characteristic performance – up to 50 dB in Directivity
• Best time domain analysis
• Fast and accurate optoelectronic measurements from 70 kHz to 40, 70 GHz and 110 GHz, at 850, 1060, 1310 and 1550 nm wavelengths, using MN4765B O/E Calibration module

Broadband VNA Konfigürasyonları:

• VectorStar 2 and 4-port Millimeter-Wave Quick Fact Sheet
• ME7838EX/E4X Technical Data Sheet
• VectorStar E and W Band Millimeter-Wave VNA System Quick Fact Sheet
• VectorStar ME7838D4 Series Technical Data Sheet
• 0.8 mm Connectors, 0.8 Adapters, and Terminations Technical Data Sheet
• Vector Network Analysis Product Portfolio
• Anritsu’s RF and Microwave Test and Measurement Solutions Product Brochure
• 5G Solutions Catalog 2023
• Anritsu and Polar Instrument Solution for Delta-L 4.0 Measurement Based on Atlas SI Software with Anritsu 4-Port Benchtop VNAs Solution Flyer