EMZER
Emscope: Dual FFT-based Modal EMI Receiver

  • A fully integrated system for complete measurements of transmitted emissions up to 110Mhz.
  • Innovative MODAL Measurements (common and differential mode) for fast and accurate EMI measurements and efficient filter design.

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

Modal Measurements:

  • Real-time results (FFT)
  • Common- and Differential-Mode measurements
  • Speeds up RF filter design and problem solving
  • Better device under test (DUT) characterization
  • Ideal for R&D

Compact and Cost-effective

  • Compact solution easy to move around
  • Integrates all items inside one single box:
    • 2 channel FFT receiver
    • 2 channel 16A single phase LISN
    • Pulse limiter 5W
    • Software
    • Fiber-optic communication

Software included

  • Embedded software with free updates, no installation is required
  • Allows EMI and Modal measurements
  • Waterfall function included
  • Automatic compliance test report (csv, pdf, image)
  • Easy results comparison features
  • Pre-set EMC measuremets settings
  • Oscilloscope mode (optional)

Demo Video

Technical Specifications

Standard for EMI Test Receiver / LISN : According to CISPR 16-1-1 / 16-1-2 standards

Conducted-Emissions Frequency range

EMSCOPE 30: 9 kHz – 30 MHz
EMSCOPE 110: 9 kHz – 110 MHz
 

Detectors : Peak, quasi-peak and average

Type of measurements : Physical (line and neutral) and modal (common and differential mode) conducted emissions

Full spectrum measurement time : Equal to the measurement dwell time, which is totally configurable from 1 s to 15 s

Resolution Bandwidth Filters : 200 Hz, 9 kHz and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)

Integrated circuits : Pre-amplifier and pulse limiter

AMN impedance / Pre-filter Choke : 50 Ω || (50 μH + 5 Ω) / 250 μH

Maximum Continuous Current : Up to 16 A @ 230 VAC (socket dependent; check user manual)

Maximum Continuous Voltage : Up to 300 VAC – 325 VDC (socket dependent; check user manual)

Artificial hand / connector type : 510 Ω + 220 pF / 4 mm banana

Connector for EUT / mains: Schuko socket (Type F) / IEC C20

Physical Properties

Height: 195 mm

Width: 252 mm

Depth: 438 mm

Weight: 8.5 kg