SOLID STATE RF & mICROWAVE AMPLIERS


Vectawave Technology Limited was established in 1997 and is a manufacturer of rugged, air-cooled, class A power amplifiers for use in industrial, military and medical applications.


Our selection of power amplifiers is available in frequency ranges from 10kHz to 6GHz and power levels up to 4kW.

BROADBAND POWER AMPLIFIERS

10KHz – 100MHz

VBA 100 SERIES

Output powers from 30W to 3kW

150KHz – 230MHz

VBA 230 SERIES

Output powers from 22W to 80W

10KHz – 250MHz

VBA 250 SERIES

Output powers from 80W to 2500W

12MHz – 200MHz

VBA 200 SERIES

Output power 3000W

10KHz – 400MHz

VBA 400 SERIES
Output powers from 30W to 260W

1MHz – 400MHz

VBA 400 SERIES

Output power 100W

80 – 1000MHz

VBA 1000 SERIES

Output powers from 65W to 2000W

Upto 1000MHz

VBA 1000 EXTENDED SERIES

Output powers from 18W to 70W

1 – 2GHz

VBA 2000 SERIES

Output powers from 50W to 100W

1 – 2GHz

VBA 2000 PULSED SERIES

Output powers from 2000W to 8000W

1000MHz – 3200MHz

VBA 1032 SERIES

Output power 450W

0.7 – 4.2GHz

VBA 0742 SERIES

Output powers from 18W to 250W

2 – 6GHz

VBA 2060 SERIES

Output powers from 15W to 200W

1 – 6GHz

VBA 1060 SERIES

Output powers from 15W to 200W

0.8 – 6GHz

VBA 0860 SERIES

Output powers from 15W to 200W

0.6 – 6GHz

VBA 0660 SERIES

Output powers from 15W to 200W

700MHz – 2700MHz
(Class AB)

VBA 2700 SERIES

100W to 200W single and dual channel output powers

VBA 100 series
10KHz – 100MHz

10 kHz – 100 MHz amplifier range covers output
Power ranging from 30W to 3 kW.

The characteristics of this range are as follows:

  • Class A for ultimate low distortion and reverse load tolerance
  • No folding back or closing with high reflection
  • Silicon push-pull MOSFET output stages for reduced harmonic content.

VBA100 – 30 30W VERSION
VBA100 – 110 110W VERSION
VBA100 – 200 200W VERSION
VBA100 – 400 400W VERSION
VBA100 – 900 900W VERSION
VBA100-1500A 1500W VERSION
VBA100 – 3000A 3000W VERSION

VBA 230 SERIES
150KHz – 230MHz

Our 150 kHz-230 MHz amplifier range covers output
Power ranging from 22W to 80W.
The characteristics of this range are as follows:

  • Class A for ultimate low distortion and reverse load tolerance
  • No folding back or closing with high reflection
  • Silicon push-pull MOSFET output stages for reduced harmonic content

VBA230 – 22 22W VERSION
VBA230 – 35 35W VERSION
VBA230 – 80 80W VERSION

VBA 250 SERIES
10KHz – 250MHz

Our 10 kHz-250 MHz amplifier series provides an output
Powers from 80W to 2500W.
The characteristics of these amplifiers are as follows:

  • Rugged silicon MOSFET push-pull output design
  • High efficiency proprietary combiner design
  • Class A for maximum mismatch drive
  • General linear power requirements

VBA250 – 80 80W VERSION
VBA250 – 120 120W VERSION
VBA250 – 200 200W VERSION
VBA250 – 400 400W VERSION
VBA250 – 600 600W VERSION
VBA250 – 800 800W VERSION
VBA250-1500A 1500W VERSION
VBA250 – 2500A 2500W VERSION

VBA 200 SERIES
12MHz – 200MHz

The VBA200-3000 is a 12-200MHz high power amplifier designed for applications where a robust Class A mismatch tolerant amplifier is required.

  • Rugged push-pull Silicon LDMOS technology
  • Class A for maximum mismatch drive
  • High efficiency proprietary combiner design

VBA200-3000 3000W VERSION

VBA 400 SERIES
10KHz – 400MHz

Our 10 kHz – 400 MHz amplifier series consists of five models with power ranging from 30W to 260W. The specifications of the series are as follows:

  • Class A for ultimate low distortion and reverse load tolerance
  • No folding back or closing with high reflection
  • Silicon push-pull MOSFET output stages for reduced harmonic content

VBA400 – 30 30W VERSION
VBA400 – 80 80W VERSION
VBA400 – 110 110W VERSION
VBA400 – 150 150W VERSION
VBA400 – 260 260W VERSION

VBA 400 SERIES
1MHz – 400MHz

Our 1 – 400 MHz amplifier has an output power of 100W. The specifications in the range are as follows:

  • Class A for ultimate low distortion and reverse load tolerance
  • No folding back or closing with high reflection
  • Silicon push-pull MOSFET output stages for reduced harmonic content

VBA400 – 100 100W

80 – 1000MHz
VBA 1000 SERIES

Our 80 – 1000 MHz amplifier series has become one of Vectawave’s best-selling products.

Vectawave Technology offers GaAs and silicon-based solutions in this important EMC frequency range. The characteristics of this range are as follows:

  • Class A for ultimate low distortion and reverse load tolerance
  • No folding back or closing with high reflection
  • Push-pull FET output stages for reduced harmonic content

VBA1000 – 30 30W VERSION
VBA1000 – 125s 125W VERSION
VBA1000 – 250s 250W VERSION
VBA1000-350s 350W VERSION
VBA1000-600s 600W VERSION
VBA1000-1000s 1000W VERSION

Up to 1000MHz
VBA 1000 EXTENDED SERIES

Vectawave’s very wideband VBA1000 extended series includes models with starting frequencies at 10kHz, 100kHz, 1MHz and 10MHz, depending on the model. The operating upper frequency limit for all models in this series is 1000MHz.

VBA1000 – 35 35W VERSION
VBA1000 – 45 45W VERSION

1 – 2GHz
VBA 2000 SERIES

Our 1000MHz-2000MHz high power amplifiers are primarily designed for EMC applications.

The VBA 2000 series products are based on our GaAs technology, which offers the user the advantages of linearity, robustness and efficiency. The features of this series are as follows:

  • Solid state
  • GaAs design with proven high reliability
  • Class A for maximum mismatch drive
  • General linear power requirements

VBA2000 – 50 50W VERSION
VBA2000 – 100 100W VERSION

1 – 2GHz
VBA 2000 PULSED SERIES

The pulse amplifier series operates in the 1 – 2 GHz frequency band. The features of the series are as follows:

  • Solid State GaN Technology
  • RTCA DO-160 Part 20 test
  • CW Capability
  • Internal Pulse Generation

VBA 2000-2000P – 2000W VERSION (enquire for data sheet and lead time)
VBA 2000-4000P – 4000W VERSION
VBA 2000-8000P – 8000W VERSION (enquire for data sheet and lead time)

1000MHz – 3200MHz
VBA 1032 SERIES

Our 1000MHz – 3200 MHz amplifier delivers 450W of power. The specifications of this range are as follows:

  • GaN technology
  • Class A for maximum mismatch drive
  • Features proprietary Quadrature Hybrid designs with high efficiency

VBA1032-450 450W VERSION

0.7 – 4.2GHz
VBA 0742 SERISI

Our 700 – 4200 MHz amplifier series consists of three models –
The characteristics in the range are as follows:

  • GaN technology
  • Class A for maximum mismatch drive
  • Features proprietary Quadrature Hybrid designs with high efficiency

VBA0742 – 18W VERSION
VBA0742 – 30W VERSION
VBA0742 – 50W VERSION
VBA0742 – 70W VERSION 
VBA0742 – 130W VERSION
VBA0742 – 250W VERSION

2 – 6GHz
VBA 2060 SERIES

Our 2000 – 6000 MHz amplifier series consists of three models –
The characteristics in the range are as follows:

  • GaN technology
  • Class A for maximum mismatch drive
  • Features proprietary Quadrature Hybrid designs with high efficiency

VBA2060 – 15W VERSION
VBA2060 – 25W VERSION
VBA2060 – 60W VERSION
VBA2060 – 125W VERSION
VBA2060 – 200W VERSION

1 – 6GHz
VBA 1060 SERIES

Our 1000 – 6000 MHz amplifier series consists of four models –
The features in the range are as follows:

  • GaN technology
  • Class A for maximum mismatch drive
  • Features proprietary Quadrature Hybrid designs with high efficiency

VBA1060 – 15W VERSION
VBA1060 – 25W VERSION
VBA1060 – 40W VERSION
VBA1060 – 60W VERSION
VBA1060 – 125W VERSION
VBA1060 – 200W VERSION

0.8 – 6GHz
VBA 0860 SERIES

Our 800 – 6000 MHz amplifier series consists of three models –
The characteristics in the range are as follows:

  • GaN technology
  • Class A for maximum mismatch drive
  • Features proprietary Quadrature Hybrid designs with high efficiency

VBA0860 – 15W VERSION
VBA0860 – 25W VERSION
VBA0860 – 60W VERSION
VBA0860 – 125W VERSION

0.6 – 6GHz
VBA 0660 SERIES

Our 600 – 6000 MHz amplifier series consists of three models –
The characteristics in the range are as follows:

  • GaN technology
  • Class A for maximum mismatch drive
  • Features proprietary Quadrature Hybrid designs with high efficiency

VBA0660 – 15W VERSION
VBA0660 – 25W VERSION
VBA0660 – 60W VERSION
VBA0660 – 125W VERSION
VBA0660 – 200W VERSION

700MHz – 2700MHz
(Class AB)
VBA 2700 SERIES

This family of 700MHz – 2700MHz class AB power amplifiers is specifically designed for PIM applications but is also suitable for general purpose applications. The features of this series are as follows:

  • High-reliability GaN design
  • Low cost, high efficiency
  • EU class design
  • Ideal for PIM applications

Amplifier options are as follows:

VBA2700-100D-HE 100W